n features l flat type relay for surface mounting l super small and light weight height: 6.5 mm weight: approximately 1.5 g l ul, csa recognized l conforms to fcc part 68 surge strength 1,500 v l high sensitivity and low power consumption l high reliabilitybifurcated contacts l dil pitch terminals l plastic sealed type (a) series name as : as series (b) operation function nil : standard type l : latching type (c) number of coil nil : single winding type d : double winding type (d) nominal voltage refer to the coil data chart (e) contact w : bifurcated type (f ) enclosure k : plastic sealed type (g) packing orientation b : standard type (h) packing quantity 05 : 500 pieces note: actual marking omits the hyphen (-) of ( * ) and -b05 n ordering information as l C d 12 w C k C b 05 [example] (a) (b) ( * ) (c) (d) (e) ( * )(f) ( * ) (g) (h) as series miniature relay 2 poles1 to 2 a (for signal switching) not for new designs
2 as series not for new designs nominal voltage contact rating 0.5 a 125 vac 1.5 to 48 vdc 2 a 30 vdc resistive 0.3 a 110 vdc n safety standard and file numbers ul478, 508 (file no. e45026) c22.2 no. 14 (file no. lr35579) only ul/csa approval markings are marked on the cover. n specifications standard type single winding latching type double winding latching type item as-( ) w-k asl-( ) w-k asl-d ( ) w-k contact arrangement 2 form c (dpdt) material gold overlay silver alloy style bifurcated resistance (initial) maximum 50 m w (at 1 a 6 vdc) rating (resistive) 0.5 a 125 vac or 1 a 30 vdc maximum carrying current 2 a maximum switching power 62.5 av, 30 w maximum switching voltage 250 vac, 220 vdc maximum switching current 2 a minimum switching load* 1 0.01 ma 10 mvdc capacitance approximately 0.5 pf (between open contacts, adjacent contacts) (at 1 khz) approximately 1.0 pf (between coil and contacts) coil nominal power (at 20 c) 0.14 to 0.3 w 0.1 to 0.15 w 0.20 to 0.3 w operate power (at 20 c) 0.08 to 0.17 w 0.06 to 0.085 w 0.11 5 to 0.17 w operating temperature C40 c to +85 c (no frost) (refer to the characteristic data) time value operate (at nominal voltage) maximum 6 ms maximum 6 ms (set) release (at nominal voltage) maximum 4 ms maximum 6 ms (reset) insulation resistance (at 500 vdc) minimum 1,000 m w between open contacts 750 vac 1 minute dielectric between adjacent contacts 1,000 vac 1 minute strength between coil and contacts 1,000 vac 1 minute surge strength 1,500 v (at 10 160 m s) (between coil and contacts) life mechanical 1 10 8 operations minimum 1 10 7 operations minimum electrical 2 10 5 ops. min. (0.5 a 125 vac), 5 10 5 ops. min. (1 a 30 vdc) other vibration misoperation 10 to 55 hz (double amplitude of 3.3 mm) resistance endurance 10 to 55 hz (double amplitude of 5.0 mm) shock misoperation 500 m/s 2 (11 1 ms) resistance endurance 1,000 m/s 2 ( 6 1 ms) weight approximately 1.5 g * 1 minimum switching loads mentioned above are reference values. please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
3 as series not for new designs model nominal coil resistance must operate must release nominal voltage ( 10%) voltage* 1 voltage* 1 power as-1.5 w-k 1.5 vdc 16.1 w +1.13 vdc +0.15 vdc 140 mw as- 3 w-k 3 vdc 64.3 w +2.25 vdc +0.3 vdc 140 mw as-4.5 w-k 4.5 vdc 145 w +3.38 vdc +0.45 vdc 140 mw as- 5 w-k 5 vdc 178 w +3.75 vdc +0.5 vdc 140 mw as- 6 w-k 6 vdc 257 w +4.5 vdc +0.6 vdc 140 mw as- 9 w-k 9 vdc 579 w +6.75 vdc +0.9 vdc 140 mw as- 12 w-k 12 vdc 1,028 w +9.0 vdc +1.2 vdc 140 mw as- 18 w-k 18 vdc 1,620 w +13.5 vdc +1.8 vdc 200 mw as- 24 w-k 24 vdc 2,880 w +18.0 vdc +2.4 vdc 200 mw as- 48 w-k 48 vdc 7,680 w +36.0 vdc +4.8 vdc 300 mw n coil data chart standard type note: * 1 specified values are subject to pulse wave voltage. all values in the table are measured at 20 c. nominal coil resistance set reset nominal model voltage ( 10%) voltage* 1 voltage* 1 power asl-1.5 w-k 1.5 vdc 22.5 w +1.13 vdc -1.13 vdc 100 mw asl- 3 w-k 3 vdc 90 w +2.25 vdc -2.25 vdc 100 mw asl-4.5 w-k 4.5 vdc 203 w +3.38 vdc -3.38 vdc 100 mw asl- 5 w-k 5 vdc 250 w +3.75 vdc -3.75 vdc 100 mw asl- 6 w-k 6 vdc 360 w +4.5 vdc -4.5 vdc 100 mw asl- 9 w-k 9 vdc 810 w +6.75 vdc -6.75 vdc 100 mw asl- 12 w-k 12 vdc 1,440 w +9.0 vdc -9.0 vdc 100 mw asl- 18 w-k 18 vdc 2,160 w +13.5 vdc -13.5 vdc 150 mw asl- 24 w-k 24 vdc 3,840 w +18.0 vdc -18.0 vdc 150 mw asl-d1.5 w-k 1.5 vdc p 11.25 w +1.13 vdc 200 mw s 11.25 w +1.13 vdc asl-d 3 w-k 3 vdc p 45 w +2.25 vdc 200 mw s 45 w +2.25 vdc asl-d4.5 w-k 4.5 vdc p 101 w +3.38 vdc 200 mw s 101 w +3.38 vdc asl-d 5 w-k 5 vdc p 125 w +3.75 vdc 200 mw s 125 w +3.75 vdc asl-d 6 w-k 6 vdc p 180 w +4.5 vdc 200 mw s 180 w +4.5 vdc asl-d 9 w-k 9 vdc p 405 w +6.75 vdc 200 mw s 405 w +6.75 vdc asl-d 12 w-k 12 vdc p 720 w +9.0 vdc 200 mw s 720 w +9.0 vdc asl-d 18 w-k 18 vdc p 1,080 w +13.5 vdc 300 mw s 1,080 w +13.5 vdc asl-d 24 w-k 24 vdc p 1,920 w +18.0 vdc 300 mw s 1,920 w +18.0 vdc single winding latching type double winding latching type p: primary coil s: secondary coil note: * 1 specified values are subject to pulse wave voltage. all values in the table are measured at 20 c.
4 as series not for new designs n reference data n characteristic data please see a relays. 100 80 60 40 20 01020304050607080 as-5w-k n=100 make break { } ? z } ? } } ~ contact res istance (m ) distribution (%) distribution of contact resistance
5 as series not for new designs n dimensions l dimensions l schematics (top view) l pc board mounting pad layout (top view) as, asl type (non-latching type, single winding latching type) asl-d type (double winding latching type) n recommended soldering conditions (temperature profile) note: 1. temperature profiles show the temperature of the pc board sur- face. 2. please perform soldering test with your actual pc board before mass production, since the temperatures of pc board surfaces vary according to the size of pc board, status of parts mounting and heating method. unit: mm
6 as series not for new designs n packing (1) packing method (only tape packing is available) ? taping standards : jis c 0806 and rc - 1009b (eiaj) ? tape type : tb2416 or te2416 ? reel type : r24d ? quantity of 1 reel : 500 pieces ? packing orientation code : b feeding orientation mark side (2) dimensions (in mm) ? reel dimensions ? tape dimensions note: relays are sold in packs of 500 pieces, please order 500 pieces as one unit. ? 1.55 ? 2002 fujitsu components america, inc. all company and product names are trademarks or registered trademarks of their respective owners. rev. 03/2002 japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: marcom@fcai.fujitsu.com web: www.fcai.fujitsu.com europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: www.fceu.fujitsu.com asia pacific fujitsu components asia ltd. 102e pasir panjang road #04-01 citilink warehouse complex singapore 118529 tel: (65) 375-8560 fax: (65) 273-3021 email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com fujitsu components international headquarter offices
|
